I-o-display-systems Basic I/O Product Manual de usuario descargar pdf (Pagina 21)

Setup & Installation 2

2-4(Vol.1)

BASIC I/Os can be networked together to obtain up to 4096 I/O points of data. These serial

networks can be either multidrop or repeat.

Figure 2-3 Multidrop V.S. Repeat networks

Multidrop:

Multidrop networks can be up to 5000 ft long end-to-end.

Each station is passively located on the network and represents one “Drop” or

load to the host communication driver.

A multidrop network will tolerate loss of power to any one station without

effecting the rest of the network..

RS-485 can only be multidrop

Signal boost may be necessary depending on line conditions and number of

drops.

Repeat:

Repeat networks can be as long as 5000 ft between each unit.

Each station plays an active role in communications to other units. If power is

removed from a unit in a repeat network, communications to units “downstream”

from it will be lost as well.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 80 81

Sin comentarios

I-o-display-systems Basic I/O Product Manual de usuario Pagina 21